Manfred Herweg controls the electrical heating elements in an industrial furnace.

Sintering and firing setters with the highest demands to geometry and material quality

UltraSetters UV 1700-10 are lightweight sintering and firing setters based on polycrystalline mullite fibres (PCW). They are suitable for application temperatures of up to 1650°C (geometry dependent) and serve as stable setters in many application areas where sintering, firing or heat treatment processes take place.

The sintering settings, thanks to their low heat capacity, only take up little thermal energy. Depending on the sizes of the products, the size, the thickness and the implementation of our setters can be adjusted individually.

Your benefits with the UltraSetter UV 1700-10:

  • Dimensionally stable
  • Saves space and energy
  • Customised sizes up to 400 x 600mm
  • Quick heating and cooling rates possible
  • Good thermal shock resistance
  • High thermal conductivity


Your Enquiry

Contact person Technical Dpt. & Sales

Manfred Herweg
Technical Director

Phone: +49 (0) 241-93677-46

Meeting online

No products have been found.

Further interesting Products


Electric heating elements (MoSi2) up to 1820°C element temperature

Process temperature control rings PTCR

Documentation of sintering, firing and heat treatment processes from 560°C to 1750°C


Wool and needled blankets (PCW) for an application temperature of up to 1600°C

FiberPlast 1800PRO

High temperature adhesive (PCW) for application temperatures up to 1750°C


Insulation boards (PCW) for an application temperature up to 1800°C


High purity electric heating elements (MoSi2) for an element temperature of up to 1850°C


Shapes (PCW) up to an application temperature of 1800°C

UltraSaggar UV 1600-10

Sintering and firing saggars of polycrystalline mullite fibres (PCW) for an application temperature up to 1600°C
+49 (0) 241 93677-0